Unfortunately though, the parts of the flashlights seem to be glued. See the picture below for more clarification. When I notice any negative points I tell them in the Cons section. Check out the details below.The build quality is great. Switching between overhand and underhand holding method is easy with its form factor. For this light, a guesstimate would be in the 6500K and 70CRI ballpark.With the provided Micro-USB Cable, the battery was charging at ~0.66A.No signs of water intrusion in the head, body, switch or charging port was seen.UI for this light is suitable for both Every Day Carry (EDC) and tactical usage as it is rather straightforward to use.This light feels well balanced in a medium sized hand (not head/tail-heavy). The prints on the MG25GTS are also crisp and clear, no complaints there either.When the Voltage drops to a certain point, the light behind the side switch will start blinking rapidly, and the light will turn into its lowest output mode...29000cd is still more than the manufacturer claimed at 23000.1669 lumens is quite impressive for this size of light.
The middle flap should be attached to the holster? The main switch at the tailcap, and 1 side switch for the mode changing.
At the moment it happened it felt like it was a magnet attaching both ends.. but it wasn't I snapped the string that kept both sides together.
With that in mind, TLR tend to view mode spacing as battery life indicators (amount of runtime left) rather than the specific output (lumens).The ULTRA-LOW mode of 1 lumen which is what most would call a moonlight mode and is perfect for night-adjusted eyes and midnight snack runs.The Nitecore MH25GTS is the upgraded version of the Nitecore MH25GT model from the Multitask Hybrid Series.Let’s check out the merits and demerits of this upgraded model.The above beam profile is a rough interpretation of what is seen when white wall hunting.There are 3 main types of Power Indicators for this flashlight.This could have been avoided if a “throwier” LED like the XHP35 HI was used instead and would have made full use of the smooth reflector, but at a slightly lower maximum output.No electronic lockout but mechanical lockout is possible when needed, like during transportation in a bag.A quarter turn (anti-clockwise) of the tailcap will enable mechanical LOCKOUT.This is what the light will come with as shown below.The blinking BLUE indicator on the tailcap area depicts charging in progress and Solid BLUE indicator depicts charging has completed.Switching ON and OFF is done by the mechanical switch on the TAIL of the flashlight, so momentary activation is possible.Nitecore did not disclose the tint (color temperature) and/or the CRI (Color Rendering Index) for the LEDs used in their light. I don't think it was supposed to do that. But when I did that, I cut the thread that attaches the velcro part to the holster.. APPLY TO REVIEW MH25GTS. Hence, we recommend leaving the Tactical Ring on for this flashlight. These threads are bare, with lots of lube.